Pic. 4.67. Body level sensor mount: 1 - subframe; 2 - lower transverse lever; 3 - bolt; 4 - rear left body level sensor
Note: The body level sensor is only available as a spare part with a connecting rod and upper and lower holders.
Note: The sensor must be replaced with the subframe installed.
Removing
Disconnect plug 1.
Pic. 4.68. Body level sensor connectors
Remove bolts 2 and 3 (pic. 4.68).
Remove the sensor.
Installation
Installation is carried out in the reverse order. In doing so, please note the following.
The sensor lever must point in the direction of travel outwards.
After replacement, perform basic headlight adjustment.
Visitor comments