Contents: Removal ↓ Installation ↓
Removal
Remove the wheel.
Insert spring compress 3.
Caution: Make sure the spring is positioned correctly in the spring retainer (risk of injury).
Fig. 4.82. Installing spring compression tools:
1 – spring holder; 2 – adapter; 3 – spring compress
To tighten the spring clamp, use a wrench or a reversible ratchet (Fig. 4.82).
Compress the spring until it can be removed.
[The original can be found at: www.VWMANUAL.ru]
Remove the spring.
Installation
When installing, take into account the mounting position.
Fig. 4.83. Spring mounting position
The beginning of the spring must be pressed against the stop of the lower spring support (Fig. 4.83).
Install the spring together with the support.
There is a journal on the lower spring support.
Fig. 4.84. Installing the journal
Insert the journal into the hole in the lower wishbone (Fig. 4.84).
Then install the top support into the top end of the spring.
Release the spring, while installing the upper spring support on the body protrusion.
Remove the spring compressor.
Install and tighten the wheel.
Visitor comments