| Threaded connection | Thread | Tightening torque, Nm |
| Stretcher | ||
| With lower wishbone | M12x1.5 | 95 |
| With upper wishbone | M12x1.5 | 95 |
| To the body | M12x1.5x110 | 90+90° |
| With transverse steering rod | M12x1.5x90 | 90+90° |
| Rear left body level sensor | ||
| To the subframe | M5x20 | 5 |
| With lower wishbone | M5x20 | 5 |
| Wheel hub bearing housing | ||
| With lower wishbone | M12x1.5x75 | 90+90° |
| With upper wishbone | M14x1.5x115 | 130+90° |
| With transverse steering rod | M14x1.5x115 | 130+90° |
| To the wheel hub with bearing | M16x1.5x70 | 200+180° |
| With speed sensor | M6x16 | 8 |
| With protective screen | M6x10 | 12 |
| Trailing arm | ||
| To the wheel bearing housing | M12x1.5x40 | 90+45° |
| To support bracket | M12x1.5x80 | 90+90° |
| Support bracket to the body | M10x35 | 50+45° |
| Lower wishbone | ||
| Protection to the wishbone | M6x12 | 8 |
| Shock absorber | ||
| To the wheel bearing housing | M14(1.5x85 | 150 +90* |
| With shock absorber support | M10x1.0 | 25 |
| To the body | M10x35 | 50+45° |
| Stabilizer | ||
| To the subframe | M8x30 | 25 +45° |
| To the connecting rod | M10 | 40 |
| Connecting rod to the hub bearing housing | M10 | 40 |
(The article is posted on this website: «VWManual»)
Visitor comments