Car clutch repair Volkswagen Passat B4

Clutch — features of the device
The clutch (Fig. 4-1) is a Fichtel und Sachs brand, installed on all engines except AFN, dry, single-disc, with a central pressure spring, with a cable-type backlash-free or...

Removal and installation the clutch
To remove the clutch, remove the gearbox as described in the subsection " Removal and installation the gearbox ". If further use of the clutch is intended, mark the position of...

Mechanical clutch drive
Removal and installation the clutch cable Press the clutch pedal several times until it stops (Fig. 4-5). Fig. 4-5. Clutch mechanical drive parts: 1 — clutch pedal; 2 — clutch...

Checking the clutch operation
Press the clutch pedal fully at least five times. Press the clutch release fork lever all the way in the direction opposite to the clutch release stroke. The lever stroke should...

Removal and installation the clutch servo spring
Remove the relay box cover and storage shelf. Release the tension of the sickle spring by pressing the clutch pedal all the way and fixing it in this position with some object,...

Removal and installation the clutch master cylinder
Remove the brake and clutch hydraulic fluid reservoir cap (Fig. 4-7) and remove the fluid from the reservoir using a syringe. Fig. 4-7. Hydraulic clutch drive parts: 1 — clutch...

Removal and installation the clutch slave cylinder
Remove the brake and clutch hydraulic fluid reservoir cap and remove the fluid from the reservoir using a syringe. Unscrew the gear selector lever pivot bolt (Fig. 4-8), then...

Bleeding the clutch hydraulic drive
It is best to remove air from the clutch hydraulic drive using a special installation for bleeding under pressure. The pressure during bleeding should not exceed 2.5 kgf/cm²....

This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Passat B6 Passat B5 Passat B4

Passat B3 Passat B2