Removal and installation the oil level and temperature sensor G266 (VW Tiguan 1)

• 1 - Bolt - 10 Nm; self-locking, replace
• 2 - Seal; replace
• 3 - Electrical connector
• 4 - Oil level and temperature sensor "G266"

Mounting position of thrust washer

Caution: When installing the intermediate gear, the thrust washer "A" must not come out of the recesses of the balance shaft block housing "arrows". Otherwise, it will be jammed. If necessary, fix it with grease on the balance shaft block housing.



[The original text can be found on the portal: www.VWManual.ru]