Removal the balance shaft assembly (VW Tiguan 1)

Remove the oil pan. Remove the poly V-belt. Remove the torsional vibration damper. Set the crankshaft to the TDC position of the 1st cylinder and fix it using the "T10050" lock.

Instructions: Marks on the crankshaft toothed pulley "2" and the crankshaft lock "T10050" "1" must match. In this case, the pin of the crankshaft lock "T10050" must enter the hole of the cover.

Unscrew the bolts in sequence -8...1- and remove the balance shaft block with the oil pump.



[The article is published on this resource vwmanual]