Pic. 2.173. The procedure for tightening the oil pan bolts
Remove the oil pan.
Pic. 2.174. Lock tabs
Remove the chain cover. If necessary, unlock the locking tabs through the holes with a small screwdriver (pic. 2.174).
Pic. 2.175. Unscrewing the oil pump chain sprocket
Loosen the oil pump chain sprocket bolt (pic. 2.175). You can hold by the center bolt of the vibration damper.
Attention: The balance shaft drive sprocket must not be unscrewed.
Pic. 2.176. Tensioner bar loosening
Loosen the tensioner bar with a screwdriver and fix it with a hexagon wrench 1, wrench size 3 mm (pic. 2.176).
Pic. 2.177. chain hanging
Remove the oil pump sprocket and hang the chain on the balance shaft drive (pic. 2.177).
Pic. 2.178. Balancing shaft drive mounting bolts
Unscrew the balance shaft drive bolts from the edges to the center and remove it (pic. 2.178).
Remove the intermediate plate.
Visitor comments