2. Before removing one or the other cable, you must set the gear selector to the position "R" (parking).
3. To remove the gas pedal cable, you must first loosen the cable adjusting nut, and then disconnect the cable from the control lever, and disconnect the metal cable protection from its bracket. You can then disconnect the cable from the pedal and remove it in the same way as on manual transmission models.
4. In order to remove the throttle cable, it is necessary to loosen the nut and locknut in the support bracket on the carburetor, remove the clip that secures the cable, and disconnect it from the carburetor.
5. At the end of the cable at the gearbox, lift and remove the fixing clip and disconnect the cable from the control lever and the fixing bracket.
6. Install both cables in sequence. reverse to removal, but each cable must be adjusted.
Pic. 3.12. Carburetor mount 2E2
1, 2, 3 diametrical bolts securing the carburetor to the manifold.
Visitor comments