General description of the ignition system Before starting work on servicing electronic ignition systems, you should familiarize yourself with the requirements, the obligatory fulfillment of which is related to the safety...
Electronic ignition system VEZ Fully electronic VEZ ignition system (pic. 179) is an ignition system with an electronic control unit. Pic. 179. Elements of the electronic ignition system VEZ: 1 - control unit;...
Removal and installation of the distributor of ignition VEZ Removing Similar to removal from a 1.3 liter engine, however, the following must be done in addition: For 1.6L engines. release before December 1984 - disconnect the wire going to...
Checking the VEZ ignition system Checking the ignition coil It is carried out similarly to the test for engines with a volume of 1.3 liters, however, the resistance of the primary and secondary windings is...
Checking the lead angle (moment) Ignition Digifant A strobe is required for verification. Check temperature sensor. Connect a stroboscope in accordance with its instruction manual and a tachometer. Leave the engine to idle....
Lead angle adjustment (moment) Ignition Digifant To adjust the lead angle (moment) ignition requires a tachometer and stroboscope, while the oil temperature must be at least +80°C, and the carburetor air damper is fully open....
Spark plug The assessment of the performance of spark plugs, the features of their operation is similar to the assessment of the performance of spark plugs installed on a 1.3-liter engine....