Removal and installation of a door Removing Open the door. At the bottom, slide the clamping washer off the door latch pin; pull your finger up. At the upper and lower hinges, unscrew, respectively, two M8 bolts...
Removing the lining (plating) doors Loosen two screws (with cross grooves) armrest; remove the armrest. Preparation for dismantling the door trim: 1 - plastic plugs for the locking screws of the armrest; 2 - door...
Removing the door lock You can see the door lock in the pictures. The illustrations indicate the details indicated in the text. lock cylinder (5): 1 - locking screw; 2 - capture; 3 - spring; 4 - sealing...
Removing the door handle Loosen the screw at the back, on the narrow side of the door (see fig.). The door handle is fixed from the outside with a screw (1), placed under the decorative overlay (2), as...
Removing the lock cylinder Insert the key into the lock cylinder so that when the cylinder is pulled out, the plates and lock springs do not fall out. Unscrew the Phillips screw at the rear end of the lock...
Removing the side glass Remove door trim. Lower the door glass. Carefully remove the seals with a flat screwdriver. At the top, pull out the glass guides by about 10 cm. Unscrew the guide screws at the...
Removing the power window Remove door trim. Lower the door glass. Detach the glass from the power window: lift it up a little and support it on two spacers of the appropriate height so that the glass...
Removal and installation of a windshield In the described models, starting from August 1981, glass from multilayer (safe) material. Such glass does not break into thousands of pieces in case of damage. Only cracks appear...