Lower the door glass.
Carefully remove the seals with a flat screwdriver.
At the top, pull out the glass guides by about 10 cm.
Unscrew the guide screws at the bottom (see fig.) and above, under the rubber seal.
Driver's door with trim removed (2): 1 - lining under the inner handle; 2 - locking screw guide window; 4 - the axis of the power window handle; 5 - button for mirror adjustment, 6 - front guide screw; 7 - window regulator locking screw
Slide the guides obliquely down into the door.
Disconnect the door glass from below, near the power window; lift up and out of the door.
If necessary, with the guide removed, the window can also be removed if the rubber seal is damaged.
Visitor comments