- 1 - mirror housing
Remove the inner door trim before removing. Remove the cover -3- and unscrew the 3 screws -2- securing the mirror housing while holding it from the outside. In the case of an electrically adjustable mirror, disconnect the plug connector in the upper front part of the door. Then take the mirror out.
- 2 - bandage with a cylindrical head and a sphere
- 3 - cover
- 4 - manual control
- 5 - countersunk screw
- 6 - corrugated cover
- 7 - control knob
- 8 - mirror glass
Mounted in the holder of the mirror housing. First, press the mirror glass from the body with a wide plastic spatula at the bottom, then at the top. At the same time, protect the mirror housing from damage with a rag or paper. To install, insert the mirror glass into the holder and press firmly.
Attention: Press only in the center of the glass and always wear protective gloves. Risk of injury due to possible breakage of the mirror glass.
Attention: When replacing individual parts, make sure that the mirror housing -1- and the mirror glass -8- are made by the same manufacturer (the same brand name of the manufacturer on the underside of the housing and respectively on the rear side of the mirror glass).
Removal and installation of an internal mirror
Removing
Rotate the heel of the interior mirror by 15°-20°and unfasten it.
Installation
Attach the heel of the interior mirror in the expanded position and turn in the opposite direction.
Visitor comments