Car models up to 9/93
- 1 — bolt, 5 Nm
- 2 - front lining
Unscrew the hexagon-head bolts -1 - and remove the front trim from the lock beam diagonally upwards, pulling it out with the retaining tabs.
- 3 - wing edge protective detail
Before installing the front trim, check the strength of the protective part.
- 4 - protective detail of the edge of the lock beam
Before installing the front trim, check the strength of the protective part.
- 5 - sealing gasket
To replace, remove the front trim. The sealing gasket is equipped with a clamping profile.
Car models since 10/93 (with radiator grille)
- 1 — radiator grille
To remove, use a screwdriver to disengage the upper and lower locking tabs. Remove the radiator grille from the lock beam. When installing, align the radiator grille to the middle mounting point (arrow) and secure it.
- 2 - decorative overlay
Before removing the decorative frame, it must be pressed out,
- 3 - guide piece
- 4 - bolt with non-falling washer
- 5 - decorative frame
Painted in the color of the car.
The original text is available on the website VWmanual
Visitor comments