Contents: Removal ↓ Installation ↓
Fig. 8.54. Front bumper trim:
1 - cladding; 2 - screw; 3 - bolt; 4 - guide profile; 5 - bolt.
NOTE: Minor deviations may apply depending on the model variant.
NOTE: Depending on the model variant, slight deviations must be taken into account during removal and installation.
Removal
Remove the radiator grille. Unscrew the screws in the front part of the fender liner.
Remove screws 2.
Unscrew the bolts 5 from below.
Unscrew screws 3 in the mudguard area.
Unlock the clips under the headlights on the left and right.
With the help of a second mechanic, remove the bumper trim from the guide profiles 4.
Depending on the vehicle's equipment, disconnect the wires and hoses of all available electrical components.
Installation
Installation is carried out in reverse order.
The original can be seen on the portal VWmanual
Visitor comments