Exhaust system device Exhaust system of front-wheel drive vehicles with four- and five-cylinder gasoline engines 1 - tunnel; 2 - suspension; 3 - bolt, 25 Nm; 4 - exhaust pipe and catalyst. Protect from...
The device and use of the catalyst Catalyst 1 - body; 2 - seal; 3 - honeycomb catalyst Elements included in the catalyst and products leaving the catalyst Catalysts are installed on all cars to reduce the amount of...
Removal and installation of the exhaust system Turbochargers for vehicles with AHF and ALH engines 1 - exhaust manifold; 2 - intake manifold; 3 - from the air cooler; 4 - seal. When installing, a new seal must be used; 5 -...
Exhaust system alignment Distance x on both sides of exhaust pipe and cross member x is the distance. It should be the same on both sides of the exhaust pipe. After each removal or disconnection of the...
Replacing the middle / rear muffler Order of execution 1. The center and rear mufflers are factory fitted as one piece. Despite this, the silencers can be replaced individually. 2. If it is difficult to disconnect...
Removal and installation of one muffler The location of the prints on the exhaust pipe 1, 3 - prints for mounting the clamping bracket; 2 - imprints of the place where the exhaust pipe was cut; 4 - clamping bracket...
Removal and installation of a lambda sensor Exhaust Gas Recirculation System on SDI Diesel Models 1 - the lower part of the intake manifold; 2 - seal. When installing, a new seal must be used; 3 - valve of the recirculation...