Removing
1. Disconnect the negative cable from the battery.
2. Loosen lock nut and adjusting nut (arrow) (pic. 8.3).
3. Unhook the clutch cable from the operating gearshift lever.
4. Remove the rubber bushing from the support on the gearbox.
5. Remove a cover of a ware box and take out a box, disconnect the block of the relay from support.
6. Remove the clutch pedal cover from the support bracket (arrows 1 and 2) (pic. 8.4).
7. Disconnect the clutch cable from the clutch pedal (arrow) (pic. 8.5).
8. Unhook the clutch cable from the bracket on the expansion tank.
9. Remove the clutch cable.
Installation
10. Installation is carried out in the reverse order of removal.
Visitor comments