Car front suspension Volkswagen Polo 4
General information
The load-bearing element of the front axle is a beam bolted to the body. Both transverse levers are attached to the front axle beam, and their other ends are attached to the...
The load-bearing element of the front axle is a beam bolted to the body. Both transverse levers are attached to the front axle beam, and their other ends are attached to the...
Front wheel suspension
1 - shock absorber strut 2 - cardan shaft with constant velocity joint 3 - lining plate There are different sizes, determined by the spare parts catalog. 4 - Bolt with cylindrical...
1 - shock absorber strut 2 - cardan shaft with constant velocity joint 3 - lining plate There are different sizes, determined by the spare parts catalog. 4 - Bolt with cylindrical...
Removal and installation the shock absorber strut
Removal Mark the direction of rotation of the tire with an arrow. Loosen the wheel bolts. Raise the car so that the front axle is unloaded. Unscrew the nut with a stamped rim "10"...
Removal Mark the direction of rotation of the tire with an arrow. Loosen the wheel bolts. Raise the car so that the front axle is unloaded. Unscrew the nut with a stamped rim "10"...
Shock absorber/ shock absorber/ coil spring
1 - steering knuckle 2 - nut, 60 Nm + 90° Replace after each dismantling. 3 — bolt Replace after each dismantling. 4 — shock absorber Replaced separately. 5 - Limiting buffer 6 -...
1 - steering knuckle 2 - nut, 60 Nm + 90° Replace after each dismantling. 3 — bolt Replace after each dismantling. 4 — shock absorber Replaced separately. 5 - Limiting buffer 6 -...
Disassembling the shock absorber/shock absorber/removing and installing the coil spring
Removal Remove the shock absorber strut, see the relevant chapter above. Caution: To remove the shock absorber, the coil spring must be compressed using a suitable spring...
Removal Remove the shock absorber strut, see the relevant chapter above. Caution: To remove the shock absorber, the coil spring must be compressed using a suitable spring...
Checking/removing and installing the ball joint
Examination Safety instructions There is a risk of accident when lifting the vehicle! Please read the section beforehand " Lifting a car ". Raise the front of the car onto jack...
Examination Safety instructions There is a risk of accident when lifting the vehicle! Please read the section beforehand " Lifting a car ". Raise the front of the car onto jack...
Removal and installation the propeller shaft
Note: When the driveshaft is removed, the vehicle must not rest its full weight on the wheels, since the lack of axial compression will damage the hub bearing. Since the...
Note: When the driveshaft is removed, the vehicle must not rest its full weight on the wheels, since the lack of axial compression will damage the hub bearing. Since the...
Cardan shaft/cardan shaft bellows/constant velocity joints
1 - right cardan shaft (tubular) 2 - bolt with cylindrical head and internal slots Replace after each dismantling. Pre-tighten with a torque of 10 Nm. Then finally tighten with a...
1 - right cardan shaft (tubular) 2 - bolt with cylindrical head and internal slots Replace after each dismantling. Pre-tighten with a torque of 10 Nm. Then finally tighten with a...
Disassembling the cardan shaft
Damaged bellows must be replaced immediately. To replace bellows, the cardan shaft must be disassembled. A defective ball joint is determined by knocks and clicks when turning the...
Damaged bellows must be replaced immediately. To replace bellows, the cardan shaft must be disassembled. A defective ball joint is determined by knocks and clicks when turning the...
This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian
Similar sections from other manuals for VW cars:
Chassis: Front suspension Volkswagen Passat B2 (1981-1988)
Chassis: Front suspension Volkswagen Golf 1 (1974-1984, petrol)
Chassis: Front suspension Volkswagen Touareg 1 (2002-2006)
Chassis: Front suspension Volkswagen Tiguan 1 (2007-2015)
Chassis: Front suspension Volkswagen Transporter T3 (1979-1992)
Chassis: Front suspension Volkswagen Beetle (1960-1986)
Chassis: Front suspension Volkswagen Passat B2 (1981-1988)
Chassis: Front suspension Volkswagen Golf 1 (1974-1984, petrol)
Chassis: Front suspension Volkswagen Touareg 1 (2002-2006)
Chassis: Front suspension Volkswagen Tiguan 1 (2007-2015)
Chassis: Front suspension Volkswagen Transporter T3 (1979-1992)
Chassis: Front suspension Volkswagen Beetle (1960-1986)
Polo 4
Polo 3
- General information
- User manual
- Maintenance
- Power unit
- Engine repair
- Cooling and lubrication system
- Control system
- Injection system (diesel)
- Supply system
- Exhaust system
- Chassis
- Front suspension
- Rear suspension
- Steering
- Wheels and tires
- Brake system
- Body
- Interior
- Exterior
- Electrical equipment
- Equipment and devices
- Wiper system
- Lighting system
- Electrical circuits
- General information
- User manual
- Maintenance
- Power unit
- Petrol engines 1.4 and 1.6
- Petrol engines 1.4 (V16)
- Petrol engines 1.6 and 1.8
- Diesel engines 1.7 and 1.9
- Diesel engines 1.9 D and TD
- Transmission
- Mechanical gearbox 085
- Mechanical gearbox 020/02K
- Chassis
- Front suspension
- Rear suspension
- Steering
- Brake system
- Body
- Exterior
- Interior
- Electrical equipment
- Equipment and instruments (until 2000)
- Equipment and instruments (after 2000)
- Electrical circuits
- Wiring diagrams (petrol)
- Wiring diagrams (diesel)
