Diesel engines with a capacity of 65-80 hp up to 9/94
- 1 - bolt, 10 Nm
- 2 — a back protective screen of a gear belt
- 3 - camshaft gear
- 4 — the top casing of a gear belt
- 5 - bolt, 45 Nm
- 6 - high pressure fuel pump (injection pump)
- 7 - holder
- 8 - tension roller
- 9 - nut, 45 Nm
- 10 - console
- 11 - bolt, 25 Nm
- 12 - gear wheel injection pump
- 13 - intermediate shaft wheel
- 14 - toothed belt
- 15 - crankshaft gear
- 16 - central bolt
Lubricate before installation. Pay attention to the tightening torque: hex head bolt - 180 Nm; hex bolt - 90 Nm + 1/4 turn (90'). Dowel head bolt - always replace. Use the VW-3099 locking device to loosen and tighten.
- 17 — the bottom casing of a gear belt
- 18 - torsional vibration damper
- 19 - V-belt for generator drive
- 20 - V-belt for power steering pump drive
Supercharged diesel engine 90/110 hp and a 75 hp engine. since 10/94
- 1 — the top casing of a gear belt
- 2 - toothed belt
- 3 - bolt, 20 Nm
- 4 - eccentric
- 5 - tension roller
- 6 - bolt, 45 Nm
- 7 - camshaft gear
- 8 - bolt, 25 Nm
- 9 - guide roller
- 10 - bolt, 10 Nm
- 11 - rear protective screen of the toothed belt
- 12 - gear wheel injection pump
- 13 — a gear wheel of an intermediate shaft
- 14 - crankshaft gear
- 15 - central bolt
Lubricate before installation. Tightening torque: 90 Nm +1/4 turn (90°). Always replace the bolt. Use the VW-3099 locking device to loosen and tighten.
- 16 - nut
Tightening torque: 1Z/AFN engine - 55 Nm; AAZ engine - 45 Nm.
- 17 — the bottom casing of a gear belt
- 18 - spacer clamp
Visitor comments