Caution: Do not reuse drained oil. Be sure to fill in new ATF oil - Dexron.
If the oil is changed, be sure to flush the filter with gasoline.
Pour oil into the expansion tank up to the mark «MAX».
Raise the car, see section «Vehicle lifting».
With the engine stopped, turn the steering wheel several times from one stop to the other, thanks to which the air can be bled from the cylinder.
Fill the expansion tank with oil up to the mark «MAX».
Place wheels in straight ahead position and lower vehicle.
Start the engine and leave it to idle. At the same time, observe the level of liquid in the reservoir. If the oil level drops, then add oil until its level stops at the mark «MAX».
With the engine running, turn the steering wheel several times from one stop to the other until air bubbles stop rising into the expansion tank.
Visitor comments