Contents: Removal ↓ Installation ↓
Removal
Set the wheels straight.
Using a screwdriver, remove the steering wheel cover. Remove the plug.
Unscrew the hex nut and remove the steering wheel from the splines by hand.
Installation
Install the steering wheel, first setting the wheels straight. Make sure that the steering wheel spokes are horizontal. The turn signal lever must be in neutral position.
The original article is available on the website: VWManual
Insert the spring washer and tighten the steering wheel mounting nut to a torque of 50 Nm (5.0 kgfm).
Insert the plug, install the steering wheel cover.
Visitor comments