2. Unscrew and remove the intake and exhaust manifolds.
3. Remove the camshafts and hydraulic lifters.
4. Compress the valve springs in order using a special device and remove the crackers securing the upper spring retaining plate.
5. Remove the upper valve plate and springs.
6. Remove the inner valve spring.
7. Remove the outer valve spring, being careful not to damage the valve stem.
8. Remove the valve from the cylinder head on the combustion chamber side.
9. Remove the oil seals.
10. Remove the lower valve spring retainer.
11. Place the valve parts kits in plastic bags and label them for installation in their proper locations.
Visitor comments