Fig. 3.70. Unscrewing the ATF level check plug
Remove the ATF level check plug from the oil pan (Fig. 3.70).
Fig. 3.72. Bypass tube
Remove the bypass tube 1 through the inspection hole (Fig. 3.72).
Drain the ATF.
Install the overflow tube.
Tighten the cap tightly by hand.
Fill with 3 liters of ATF through the filler tube.
Start the engine and move the selector through all positions, holding it in each position for about 10 seconds.
The information is presented on the website vwmanual
Check and top up the ATF oil level.
Visitor comments