Figure 209. Components installed on the rear side of the engine cylinder block: 1 - gasket, always subject to replacement; 2 - rear oil seal holder; 3 - oil seal; 4 - casing; 5 - clutch pressure plate; 6 - bolt (75 Nm); 7 - connecting disk; 8 - retaining ring; 9 - flywheel; 10 - bolt (20 Nm), 11 - driven disk
Attention! The flywheel must be replaced when its working surface is excessively worn due to clutch slippage.
The original material is available on the portal (vwmanual.ru)
Visitor comments