Pic. 3.40. Gear Lever: 1 - switch button; 2 - cuff; 3 - clamping bracket; 4 - soundproofing
Removing
Open the ashtray.
Remove the plastic bezel from the center console bezel 1.
Pic. 3.41. Removing the cuff
Firmly hold frame for center console 1 (pic. 3.41).
Don't remove the console.
It is possible to inadvertently disconnect the plug connections of various switches.
Unscrew the cuff up through the switch button.
Pic. 3.42. Removing the switch button
Open the clamp and pull out the switch button along with the cuff (pic. 3.42).
Installation
Turn the inside of the cuff outward.
Install soundproofing, if applicable.
Install the switch button and collar and clamp the new collar (pic. 3.42).
When put on, the shift button should engage and engage in the annular groove of the shift lever.
Fit the cuff with the synthetic material frame starting from the back.
Visitor comments