On some configurations, the engine compartment below is equipped with additional protection.
Figure 2.8 shows the left side mounting of the front noise screen. The right mount is a mirror image of the left.
To remove or install the front noise screen, you must first remove or install the side bolts.
The front and rear noise screens are shown in Figure 2.9.
To remove the screens, first unscrew the bolts A, remove the front soundproof screen 3.
Then unscrew the bolts B, remove the rear noise screen 2 from the spring fasteners 1.
Tighten the bolts with a tightening torque of 8 Nm.
Visitor comments