Removing
Remove the noise screen. Mark the running direction of the V-ribbed belt.
Turn the wrench clockwise so that the tensioner can be locked in place with the T10060 drift (pic. 2.2).
Remove poly V-belt.
Installation
Before installing the V-ribbed belt, check the secure fastening of all units (generator, air conditioner compressor, vane pump).
Check for ease of rotation of the take-off roller.
When installing the V-ribbed belt, check the direction of travel and the correct fit of the belt on the belt pulleys.
Route the V-ribbed belt as shown in Figure 2.3.
Start the engine and check the running of the belt.
Visitor comments