The rear seat headrests must be removed before folding the seat.
On vehicles with a partition net, you must first unfasten the locking screws of the net frame, and only then fold the rear seat.
To prevent damage to the seats, before folding the rear seat, install the front seats in such a way that the back of the rear seat does not rest against the front seats.
How to fold the rear bench seat
Pull up on the loop B of the seat cushion A and fold it forward.
Pull up on the seatback release button C and at the same time fold the backrest forward D. The red marking on the button will become visible.
The seat belt must not pass over the folded backrest, otherwise the rear belt tensioners will deploy in a collision.
How to put the back seat back
Tilt back the seatback D and lock it securely. Now the red marking on the release button C will no longer be visible.
Then fold back seat cushion A to its original position. When doing this, keep the middle seat belt high up, otherwise the belt will be pinched between the backrest and the cushion and it will not be possible to use it.
Make sure that the seat belts are not pinched when the seat is returned to its place and thus damaged.
Warning: The backrest of the rear seat must be securely locked so that during emergency braking, no object from the luggage compartment would be thrown forward.
Visitor comments