Removing the normal seating bench
1. Unlock the back of the banquette and recline it on the seat.
2. Unlock the bench and tip it forward, now the fastening screws are visible.
3. Unscrew hex screws (1) and remove the triple bench from the machine.
Installation
Installation is carried out in the reverse order of removal.
Attention! When installing, tighten the hexagon screws to 35 Nm.
Removing the seating bench from a two-cab machine
1. Unlock the back bench (1) locking lever and lift it up.
2. Pull the bench forward until it stops.
3. Raise the bench on one side until the guide pins (2) will not enter the upper wings. In this position, the bench is pressed against the outside of the machine.
4. Pull up the opposite side of the bench from the side of the seat console and pull the bench diagonally out of the seat console (3).
Visitor comments