Contents: Removal ↓ Rear seat armrest ↓
Removal
1. Remove the four pads 1 from the clips 2 of the child seats (see illustration).
2. Lift the front of the rear seat 3 (see arrows A in illustration 34.1) and release it from the two fastenings 4 on the floor.
3. Push the rear seat back (see arrow B in Illustration 34.1), lift its rear part up and release it from the fasteners.
4. Remove the rear seat from the passenger compartment. Install the rear seat in the reverse order of removal.
Rear seat armrest
Removal
5. Remove the rear seat.
6. Fold back the floor covering at the rear seat mounting point and remove plug 1 from the center armrest support 4 (see illustration).
7. Unscrew bolt 2 and remove clamp 3 from the central support (see illustration 34.6).
8. Release the right armrest 5 from the central support and remove it from the outside from the retaining pin 6 (see illustration 34.6).
9. Unscrew bolt 8 and disconnect seat belt buckle 9 from the floor (see illustration 34.6).
10. Remove the right armrest 5 from the passenger compartment (see illustration 34.6).
11. Disconnect the left armrest 7 from the central support, remove it from the outer side from the retaining pin and remove it from the passenger compartment (see illustration 34.6).
The armrests are installed in the reverse order of removal. The bolt securing the seat belt buckle to the floor is tightened with a force of 40 Nm, and the clamp of the central support - 9 Nm (see illustration 34.6).
(The original text can be found on the portal: VWManual)
Visitor comments