Contents: Switch A ↓ Switch B ↓
Switches A and B are used to adjust the position of the seats using the electric drive.
Regulation is also carried out when the ignition is off.
The handwheel C is used to mechanically adjust the support in the lumbar region.
The electric seat adjustment also functions when the ignition is off and the ignition key is removed.
Switch A
(The original article is posted on the website: www.VWManual.ru)
The position of the seat is adjusted by pressing the switch in the directions of the arrows:
- 1 - seat forward/backward,
- 2 - front plane of the seat up/down,
- 3 - rear seat plane up/down,
- 2 and 3 at the same time - seat height adjustment.
Switch B
The position of the seat back is adjusted by pressing the switch in the directions of the arrows.
In the direction of arrow 1 – increase the angle of the backrest.
In the direction of arrow 2 – decrease the angle of the backrest.
Visitor comments