1 - Adjustment of a seat in the longitudinal direction.
Pull the handle up and move the seat. Then release the handle and move the seat a little more until the latch is activated.
Warning: For safety reasons, the driver's seat must only be adjusted longitudinally when the vehicle is stationary!
2 – Seat back tilt adjustment.
Lean back and turn the handwheel.
Warning: The seat back must not be tilted too far back while driving, as this significantly reduces the effectiveness of the seat belts.
3 - Adjustable lumbar support.
When the handwheel is turned, the part of the seat back in the lumbar region becomes more or less arched. In this way, you should find the most favorable position for the support of the spinal column, which will avoid fatigue during long trips
4 – Seat height adjustment.
By moving up and down the handles on the outside of the seat, the seat is raised or lowered.
Lifting: pull the handle up from the starting position or do "pumping up" movement.
Lowering: push the handle down from the starting position or do "pumping up" movement.
Warning: For safety reasons, the seats must only be adjusted when the vehicle is stationary!
Visitor comments