Poly V-belt location on models without air conditioning
- 1 - crankshaft;
- 2 - tension roller;
- 3 - generator;
- 4 - V-ribbed belt;
- 5 - servo pump
Location of the V-ribbed belt on models with an air conditioning system (reversible ribbed belt)
- 1 - servo pump;
- 2 - guide roller;
- 3 - generator;
- 4 - air conditioner compressor;
- 5 - crankshaft;
- 6 - tension roller
Order of execution
1. Remove the lower mudguard of the engine compartment.
2. If the belt is to be reinstalled, use a marker or paint to mark the direction of rotation of the belt.
3. Release the tension and remove the V-ribbed belt. To loosen the tension of the V-ribbed belt, turn the central bolt (indicated by an arrow) tension roller clockwise.
Visitor comments