Figure 261. Intake and exhaust manifolds: 1 - intake manifold; 2 - bolt (25 Nm); 3 - exhaust manifold; 4 - bolt (70 Nm); 5 - nut of the exhaust pipe (25 Nm); 6 - nut (25 Nm); 7 - air distribution valve
Tighten the exhaust pipe nuts to a torque of 25 Nm.
Before connecting the oil line, the turbocharger housing must be filled with oil.
Perform the remaining operations in the reverse order to dismantling. After finishing the work, start the engine and let it idle for some time. Do not increase the rotation speed immediately, since the oil has not yet passed through the entire lubrication path.
Visitor comments