Contents: Removal ↓ Installation ↓
Removal
1. Remove the inner door trim. Carefully pull off the protective foil
2. Lower the glass and turn it away from the lift (photo 11.25). Move the glass up.
3. Unscrew the glass handle, the lifting mechanism and the vertical guide from the inner door trim.
4. Remove the entire lift mechanism through the lower opening in the inner door trim.
The article is published on this resource: VWManual
Installation
1. Install the lifting mechanism from below into the door niche, screw on the lifting mechanism and vertical guide.
2. Move the glass down and screw it to the lift.
3. Raise and lower the glass several times. If there is a lot of resistance or jamming, loosen the bolts that secure the glass to the lift, set the glass straight and tighten the bolts again.
4. Glue the protective foil.
5. Put on the inner door trim.
Visitor comments