Contents: Removal the lock ↓ Adjusting the lock hook ↓
Removal the lock
1. Loosen the two mounting bolts and move the lock back a little (photo 11.17).
2. Insert a screwdriver through the hole in the lock indicated by the arrow in photo 11.17 and block the lever that operates the lock to make it possible to disconnect the control rod.
3. Remove the lock.
Installation is carried out in the reverse order of dismantling.
Adjusting the lock hook
Installing the lock catch ensures that the door is pressed tightly against the gaskets so that the door is not too loose and does not knock while driving (photo 11.18).
[The original can be found at: VWmanual.ru]
The door gap is eliminated by adjusting the door lock hook. It is necessary to mark the hook position beforehand. Loosen the hook and move it towards the inside of the car by a millimeter. Check the door gap after closing, repeat the adjustment if necessary.
Visitor comments