Contents: Removal ↓ Installation ↓
Attention! If you remove the lock, you must first remove the outer door handle.
Removal
1. Remove the door trim.
2. Unscrew the screws (1) and remove the door handle in the direction of the arrow.
3. Unscrew the locking button from the window cutout by hand.
4. Raise the glass all the way up.
5. Disconnect the rod between the inner drive and the lock by removing it from the clips.
6. Unscrew and remove the door lock (1) together with the rod and locking rod.
Installation
1. Installation is carried out in the reverse order of disassembly.
2. Tighten all screws to a torque of 8 Nm.
Visitor comments