Removing
1. Unscrew cross screw (1) and remove the closing piece (2) from the guide bar (on the outside of the body).
2. unscrew the screw (2) on the inside of the sliding door and remove the center stop (1).
3. unscrew the screw (1) on the footrest and remove the door stop (2).
4. Fully open the sliding door while removing the roller guide from the guide rail (arrow).
5. Lower the sliding door at the front until the upper roller guide can be pulled out of the guide rail.
6. With assistance, move the door backwards until the hinge (1) slipped out of the guide bar (2).
Installation
1. Installation is in the reverse order.
2. Tighten the screws with a torque of 20 Nm.
Visitor comments