Contents: Removal ↓ Installation ↓
Removal
1. Remove the inner trim adjacent to the door seal.
2. To get to the top screw that secures the B-pillar trim (b-pillar: the second roof pillar, counting from the front, supporting the door wedge stop), fold the hooks of the trim first outward and downward, then remove them.
3. Loosen the lower seat belt fasteners and move the trim slightly to the side.
The original can be viewed on the portal: vwmanual.ru
4. Remove the door seal from the body. The rubber door seals are simply mounted.
Installation
1. Attach the door seal to the body cutout.
2. If there are any leaks, apply a commercially available sealant to the body grooves to seal the leaks in the body before installing the seal.
3. Install the trim.
Visitor comments