Contents: Removal ↓ Installation ↓
Removal
1. Remove the door trim.
2. Lower the glass down by turning the handle and unscrew it from the window lifter.
3. Lift the glass by hand all the way up and secure it in this position with adhesive tape.
4. Unscrew the hex screws (1).
5. Carefully remove the window lifter with the drive through the upper opening (arrow in the figure in point 2).
Installation
1. Installation is carried out in reverse order.
2. Tighten the screws to a torque of 8 Nm.
View the original on this portal: VWMANUAL.ru
Visitor comments