Contents: Removal ↓ Installation ↓
Removal
Remove the front door trim. Secure the glass with tape so that it does not slide down. Disconnect all connectors "3". Unscrew the three screws "2". Remove the window lifter motor assembly with the control unit "1" from the support panel.
Installation
Install the window lift motor and move the door glass up and down so that the motor engages better with the cable drum. The tightening torque of the window lift motor mounting screws "2" is 3.5 Nm. Raise and lower the glass twice to the stop using the window lifter. This is necessary to initialize the window lifter and activate the anti-pinch function. Then perform the actions performed during dismantling in the reverse order.
Visitor comments