Glued glass (VW Tiguan 1)

Windshield

• 1 - Windshield
• 2 - Adjusting wedge, 443 845 631 A
• 3 - Polyurethane adhesive sealant. Adhesive bead dimensions: width = 7 mm, height = 11 mm (including the pre-applied layer, adhesive residue on the glass and on the body flanging)
• 4 - Body flange
• 5 - The framing profile is part of the windshield, if the framing profile is damaged, a new glass must be installed
• 6 - Casing of the water-draining box. Separate from the framing profile only by hand, the use of tools is prohibited
• 7 - Gutter
• 8 - Gap between the edge of the glass and the edge of the roof. Set a uniform gap of 3.5 mm using a set of feeler gauges "3371"
• 9 - Sealing edge, is part of the windshield, if it is damaged when cutting the glass, install a new windshield

Rear window

• 1 - Rear glass
• 2 - Polyurethane adhesive sealant. Adhesive bead dimensions: width = 6.5 mm, height = 10 mm (including the pre-applied layer, adhesive residue on the glass and on the body flanging)
• 3 - Luggage compartment door
• 4 - Stop
• 5 - Sidewall
• 6 - Heating element contact

Side glass

• 1 - Side glass
• 2 - Polyurethane adhesive sealant. Adhesive bead dimensions: width = 6.5 mm, height - 10 mm (including the pre-applied layer, adhesive residue on the glass and on the body flanging)
• 3 - Body flange
• 4 - Seal, is part of the side glass
• 5 - Mounting bracket, is part of the side glass
• 6 - Rear door glass guide