Contents: Removal ↓ Installation ↓
Removal
Instructions: The process of removal and installation for the right door window regulator is described. Removal and installation of the window regulator for the left door is performed in a similar manner.
Remove the door trim. Secure the glass with tape so that it does not slide down. Unscrew the three bolts "2". Disconnect the connector "3". Remove the window lifter motor assembly with the control unit "1" from the support panel.
Installation
Install the window lift motor and move the door glass up and down so that the motor engages better with the cable drum. The tightening torque of the window lift motor mounting screws is 3.5 Nm. Raise and lower the glass twice to the stop using the window lift. This is necessary to initialize the window lift and activate the anti-pinch function. Then perform the actions performed during dismantling in the reverse order.
Visitor comments