Rear tailgate
1. Back door; 2. Phillips screw, 20 Nm; 3. Hinge; 4. Sealing plate; 5. Distance plate; 6. Hex nut; 7. Lock drive; 8. Guide pin; 9. Screw, 10 Nm; 10. Cork; 11. Screw, 20 Nm; 12. Traction; 13. Castle; 14. Hex screw, 20 Nm; 15. Hollow pin; 16. Cylindrical lock
Removing
1. Remove inner lining (2), to do this, unscrew the clips with a hex wrench (3). During subsequent assembly, do not screw in the clips, but simply press them in (1 - door).
2. Disconnect the heated rear window, license plate light, if equipped with a wiper motor and central locking, and remove the wiring from the trunk lid.
3. Support the lid or use outside help for support.
4. Disconnect the tailgate gas spring.
5. Unscrew the Phillips screws on the hinges and remove the tailgate.
Installation
1. Installation is carried out in the reverse order.
2. Tighten the crosshead hinge screws to 20 Nm.
Visitor comments