Removal and installation the radiator grille (VW Tiguan 1)

Removal the radiator grille

Remove screws "2 and 3". Pull the upper part of the grille "1" out of the front support panel "5". Unlock the latches "4" (2 pcs. on the left and right next to the emblem) "7", inserting a screwdriver through the lower opening of the grille. Sequentially disconnect the latches, pressing them from the side "arrow b", and slightly lift the radiator grille "1". Remove the grille "1" by moving in the direction of "arrow a" from the bumper trim "6".

Removal the emblem

Unlock the latches on the back of the emblem "7" and detach the emblem by turning it in the direction of "arrow a".

The original article is available on the website (vwmanual)

Installing the radiator grille

Insert grille "1" into bumper trim "4". Screw in screws "3". Tightening torque: 2 Nm. Screw in screws "2". Tightening torque: 6 Nm.

Installing the emblem

Insert the emblem "5" into the grille, "arrow a". Turn the emblem "5" in the direction of "arrow b" until the latches click into place.