Rear window wiper
- 1 - folding casing,
- 2 - nut, 15 Nm,
- 3 - wiper lever,
- 4 - sealing sleeve,
- 5 - washer nozzles,
- 6 - sealing ring,
- 7 - wiper motor,
- 8 - nut, 8 Nm,
- 9 - damping ring,
- 10 - spacer sleeve,
- 11 - wiper blade
Removing
1. Remove the rear window wiper arm.
2. Remove an internal upholstery of a back door.
3. Disconnect the electrical connector and washer fluid supply hose from the wiper motor.
4. Unscrew the wiper motor mounting nuts and remove it.
5. Remove the spacers and damping rings from the wiper motor and check their condition.
Installation
1. Install the sealing sleeve in the hole in the rear window. Carefully reinstall the wiper motor and secure with nuts.
2. Further installation is carried out in the reverse order of removal.
3. Tighten the wiper arm nut to 15 Nm.
Visitor comments