2. Remove seal 15 of inner door handle 16, see Figure 11.7
Figure 11.7. Front door
1 - door stop; 2 - internal glass gasket; 3 - outer glass gasket; 4 - external corner of decorative cornice 5 - corner glass with gasket; 5 - guide; 7 - glass guide lining; 8 - decorative cornice; 9 - glass; 10 - glass bracket; 11 - external door handle; 12 - locking rod; 13 - door lock; 14 - inner door handle rod; 15 - protection of the internal door handle; 15 - internal door handle; 17 - glass lifting mechanism.
3. Remove the safety tab from the hole in the inner door trim plate (photo 11.27)
4. Move the handle forward and remove it from the hole in which it is seated.
5. Disconnect the lock rod. Installation is performed in the reverse order of dismantling
Visitor comments