2. Loosen the screws securing the wheel arch support (photo 11.11) removing them together with the washers.
Figure 11.1. Front end elements
1 - front belt (part); 2 - headlight eyepiece; 3 - screw; 4 - radiator protection; 5 - lower radiator protection element; 6 - front belt protection; 7 - decorative grille for front belt protection; 8 - connector; 9 and 10 - screws.
3. Remove the hook on the front edge of the arch protection and remove the wheel well.
Installation
1. Install the arch protection, press in the expansion sockets and screw in the screws with washers.
The information is available on the website www.VWMANUAL.ru
2. Put on the wheel, lower the car to the ground.
3. Tighten the bolts securing the wheel to a torque of 110 Nm.
Visitor comments