Disassembly
1. Open the engine cover.
2. Use a small screwdriver to lightly push down the center portion of each of the top tabs on the plastic heatsink guard while pulling the top of the guard forward. There are eight hooks on the guard, six of which are in the upper face, and two in the lower corners next to the headlight glasses.
3. Tilt the radiator protection forward, releasing it from the lower hooks.
4. Insert the plastic radiator protection into the holes in the upper hooks in the front.
5. Press the lower part of the radiator protection into the body so that the lower hooks pop into place.
Visitor comments