Press retaining clip in intercooler in -direction of arrow- and remove hose -arrow-. Remove also the second hose leading from the intercooler.
Disconnect connector -1-. Drain coolant by removing hose -2-.
Unlock clip and remove connector -arrow- from radiator. Disconnect also the connecting fitting on the radiator below. Move radiator frame to service position.
Unscrew securing bolts -arrows- and remove air intake together with radiator fan -V7- towards top.
Note: Radiator fan -V7- and air intake must only be replaced as a set when replacing.
Unscrew securing bolt -arrow-.
Unscrew bolts -arrows- and remove radiator downwards.
Installation is carried out in the reverse order.
Tightening torques
Guide screen for radiator | 5 Nm |
Radiator and intercooler | 5 Nm |
Visitor comments