Pic. 11.13. Front window wiper assembly
1 - protection; 2 - shoulder of the janitor; 3 and 4 - wiper feathers; 5 - thrust; 6 - bracket; 7 - wiper axis; 8 - engine with transmission.
Wiper blade - replacement
Press end 1, as shown by the arrow, and push the wiper blade in direction 2. We put on the wiper blade, inserting K-2 in the opposite direction, until the safety clove pops up (photo 11.30).
The wiper arm is replaced by lifting up the arm guard 1 (pic. 11.13) and opening the nut that secures the shoulder (photo 11.31).
Now you need to unscrew the nut and remove the shoulder from the drive axle (photo 11.32)
Installing the wiper arm
Set the distance of the wiper blade from the lower edge of the front glass 55-60 mm.
Visitor comments